What are the characteristics of servo press fitting machine

2026-03-25 15:58:54

1. By increasing the production rate, the travel length can be set to the minimum necessary value for production, which can maintain a suitable forming speed for the processing content.

2. The finished product has high precision, and through closed-loop feedback control, the accuracy of the bottom dead center is always guaranteed. Pressing the product to produce burrs to prevent the occurrence of defective products.

3. Low noise, long mold life, and significantly reduced noise compared to conventional mechanical presses through low-noise mode (i.e. reducing the contact speed between the slider and the sheet metal). Moreover, the mold has low vibration and long lifespan.

4. The controllability of slider movement, which allows users to deceive, has led to the development of slider movement methods that are suitable for processing techniques. These methods can effectively improve the accuracy and stability of products, extend the lifespan and production rate of molds, and achieve silent punching, even enlarging the processing boundary (such as stamping of magnesium alloys). They are suitable for processes such as punching, pressing, stretching, embossing, and bending, as well as the characteristic curves of different raw materials. If the slider can be stopped to maintain pressure, the goal is to improve the forming quality of the workpiece.

5. Energy conservation and environmental protection have eliminated energy consuming components such as flywheels and clutches in traditional mechanical presses, reduced the number of driving parts, and simplified the mechanical transmission structure; Smooth and low oil volume, controllable travel; Due to reduced power transmission, operating costs have also been significantly reduced.

high-precision control

Triple closed-loop control of pressure, displacement, and speed, precise positioning, stable pressure, and extremely high consistency in press fitting.

Full process monitoring of pressure displacement

Real time drawing of pressure displacement curve can automatically determine whether the product is qualified/unqualified, achieving process quality control.

Energy saving

The servo system outputs power on demand, with low consumption or shutdown when not in operation, saving 30% to 70% energy compared to traditional equipment.

Smooth operation and low noise

No overflow impact, low noise and vibration, suitable for precision assembly and dust-free workshops.

Programmable process and strong flexibility

Multiple speed and pressure settings can be set, multiple programs can be stored, and different product processes can be switched with just one click.